Shenzhen Kanghongjin Electronics Co., Ltd
Specialized in SMT consumables Since 2002s
Add to Cart
| DESCRIPTION |
| M23 series single splice tape is used for jointing carrier tapes in the SMT process. It is made of 4 |
| splice tapes, release paper and PET material with superior adhesion. This splice tape is made by our |
| produced glue. |
| Part (reel) | Dimensions (pc) | Package | |
| M2308 (8mm) | 2.5/4/4/2.5mm x 40mm | 500pcs/box | |
| M2312 (12mm) | 2.5/6/6/2.5mm x 40mm | 500pcs/box | |
| M2316 (16mm) | 2.5/9/9/2.5mm x 40mm | 500pcs/box | |
| M2324 (24mm) | 2.5/16/16/2.5mm x 40mm | 250pcs/box |
| APPLICATION | ADVANTAGES |
| 1. Strips of PET tape used to join | 1. Increase Pick and Place machine output |
| 8-88mm SMT carrier tapes | by 5% - 30% |
| 2. Possible to use without the splice | 2. Reduce reel change downtime |
| tool and clip | 3. Decrease machine abrasion by reducing |
| 3. 32mm-88mm available upon request | the need to reload the feeder |
INSTRUCTIONS
| 1. Use the splice cutting tool to accurately cut the carrier tapes. |
| 2. Remove the release liner of the splice tape to reveal the adhesive side. |
| 3. Align the cut carrier tapes (cover tape down) with the splice guide placement |
| 4. Fold over the other strip to the underside of the carrier tape and press firmly |
| 5. Remove the guide placement from joined carrier tapes |
| 6. Remove and discard the clear plastic cover to complete the splice |
| ceo@szsmt. com |