Shenzhen Kanghongjin Electronics Co., Ltd
Specialized in SMT consumables Since 2002s
Add to Cart
M05 series SMT Double Splice Tape with Alignment Guide Design
| DESCRIPTION |
| M05 series splice tape is used for jointing carrier tapes in the SMT process, It is made of 2 tapes and |
| release paper with alignment guide design, and the tape is made by our produced patent material |
| with superior adhesion. |
| Part (reel) | Dimensions (pc) | Package | |
| M0508 (8mm) | 4.8mm x 40mm | 500pcs/box | |
| M0512 (12mm) | 7mm x 40mm | 500pcs/box | |
| M0516 (16mm) | 9.5mm x 40mm | 500pcs/box | |
| M0524 (24mm) | 16mm x 40mm | 250pcs/box |
| APPLICATION | ADVANTAGES |
| 1. Double strips of transparent yellow PET | 1. Increase Pick and Place machine output |
| tape used to join SMT carrier tapes | by 5% - 30% |
| 2. Possible to use with or without the | 2. Improves process efficiency |
| splice tool and clip | 3. Decrease machine abrasion by reducing |
| 3. Using imported tape in high strength | the need to reload the feeder |
| and high adhesive. | 4. Placement guide for easy alignment |
| 4. Wide base paper design for easy removal. |
INSTRUCTIONS
| 1. Use the cutting tool (MTL20/MTL30/MTL40) to accurately cut the carrier tapes. |
| 2. Remove the release liner of the splice tape to reveal the adhesive side. |
| 3. Align the cut carrier tapes (cover tape down) with the placement guide. |
| 4. Place both joining carrier tapes onto the first strip of the splice tape. |
| 5. Fold over the second strip to the underside of the carrier tape and press firmly. |
| 6. Remove and discard the clear plastic cover and guide to complete the splice. |
|
| ceo@szsmt. com |