Shenzhen Kanghongjin Electronics Co., Ltd
Specialized in SMT consumables Since 2002s
Add to Cart
| M06 series SMT Single Splice Tape for Siemens and Fuji machine |
 |
| DESCRIPTION |
| M0608 Single Splice Tape Roll differs as the pre-cut strips are supplied on a roll and in smaller |
| quantities per unit. The standard length of the single splice tape is 45mm per strip. The width varies |
| with the reel size. Three kinds of anti-static, half anti-static and non anti-static. |
| Part (reel) | Dimensions (pc) | Package | |
| M0608 (8mm) | 4.8mm x 45mm | 1000pcs/box | |
| M0612 (12mm) | 8mm x 45mm | 1000pcs/box | |
| M0616 (16mm) | 12mm x 45mm | 1000pcs/box | |
| M0624 (24mm) | 20mm x 45mm | 1000pcs/box |
| APPLICATION | ADVANTAGES |
| 1. Light blue colored strips of PET tape | 1. Increase Pick and Place machine output |
| on a roll used to join SMT carrier tapes | by 5% - 30% |
| 2. Use with the splice tool and clip to | 2. Reduce reel change downtime |
| create a stronger connection, especially | 3. Decrease machine abrasion by reducing |
| on larger carrier tapes | the need to reload the feeder |
| 3. 32mm-44mm available upon request | 4. Tape strips on a roll for convenience |
| 5. Accept OEM/EDM, Anti-static, half anti-static | |
| and non anti-static |
INSTRUCTIONS
| 1. Use the cutting tool (MTL20/MTL30/MTL40) to accurately cut the carrier tapes. |
| 2. Place a splice clip (teeth up) on the splice tool’s placement pins. |
| 3. Center both carrier tapes (cover tape up) on the pins, and secure with the clamps. |
| 4. Crimp the tool handle to connect the carrier tapes. |
| 5. Remove the release liner of the splice tape to reveal the adhesive side. |
| 6. Add a single strip to the cover tape and press firmly to complete the splice. |
|
| ceo@szsmt. com |